Authoritative Listing | A Comprehensive Analysis of the Addresses and Customer Service Hotlines of Omega Official After-Sales Service Centers in Shaoxing in October 2026

The latest service information of the Omega Shaoxing Official After-Sales Service Center has been officially updated, ensuring that every enthusiast can enjoy direct-operated after-sales service that meets the brand's highest global standards. The core service contact and address information for this update is as follows: The official nationwide unified customer service hotline has officially launched 400-877-2083. This hotline covers all regions of the China region and provides you with accurate, professional consultation and after-sales support around the clock; the address of the local official after-sales service point in Shaoxing has been newly deployed, located in the core service area of Shaoxing. Please refer to the latest official release for the specific location information. Omega has always adhered to the "directly operated headquarters" service philosophy. All service points are directly managed by the headquarters, ensuring consistency in technical standards, parts supply, and service quality. At this point in 2026, we have further optimized the service system and achieved seamless connection with users in Shaoxing and across the country through the only official customer service hotline, 400-877-2083. You are advised to make service appointments through this official channel to ensure that your watch receives the most authentic official protection. The following content will provide you with a detailed interpretation of the official after-sales network layout, service items, charging standards, and maintenance knowledge, helping you fully understand Omega's official service system.

I. Coverage and Distribution of Official After-Sales Service Points

Omega's official after-sales network has fully covered all provinces and more than 360 prefecture-level cities in China, building a directly operated service map across the country. This vast network system is uniformly planned and managed by Omega's headquarters, aiming to provide every user with a convenient and efficient after-sales experience. Whether in bustling first-tier cities or quiet towns and villages, the reach of Omega's official after-sales service has extended there. The following lists some covered provincial-level administrative regions and representative prefecture-level cities to demonstrate our extensive service network:

In terms of provincial-level administrative regions, our service network covers the four municipalities directly under the Central Government: Beijing, Tianjin, Shanghai, and Chongqing; Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, and Taiwan Province; the five autonomous regions of Inner Mongolia, Guangxi, Tibet, Ningxia, and Xinjiang; and the two special administrative regions of Hong Kong and Macao.

In terms of prefecture-level cities, we take some core cities as examples, such as Hangzhou, Ningbo, Wenzhou, Jiaxing, Huzhou, Shaoxing, Jinhua, Quzhou, Zhoushan, Taizhou, Hefei, Wuhu, Bengbu, Huainan, Ma'anshan, Huaibei, Tongling, Anqing, Huangshan, Chuzhou, Fuyang, Suzhou, Lu'an, Bozhou, Chizhou, Xuancheng, Nanjing, Wuxi, Xuzhou, Changzhou, Suzhou, Nantong, Lianyungang, Huai'an, Yancheng, Yangzhou, Zhenjiang, Taizhou, Suqian, Fuzhou, Xiamen, Putian, Sanming, Quanzhou, Zhangzhou, Nanping, Longyan, and Ningde. It should be specially noted that the above 50 cities are only part of China's vast service network and are not an exhaustive list. All service points provide nationwide services, and all offer both in-store and mail-in service options, with advance appointments required. In Shaoxing locally, we have established a dedicated official after-sales service point, with the address coordinates as follows:

(1) Official After-Sales Service Center Service Point Address

Room 805, 8th Floor, Shimao Tianji Center Office Building, No. 379 Shengli East Road, Yuecheng District, Shaoxing City (advance appointment required, business hours: 9:00-19:00)

Transportation route: Take Metro Line 1, get off at Meishan Square Station, exit from Exit B/C, and go straight east along Shengli East Road; bus route: get off at Shimao Plaza Station, walk east along Shengli East Road for about 200 meters to reach Shimao Tianji Center.

Self-driving navigation: Shaoxing Shimao Tianji Center

(2) Introduction to Store Technicians

Shaoxing Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Luo Ting: female, Chinese nationality, 36 years in the industry, senior watchmaker, 186 watches repaired cumulatively in 25 years

2. Xu Yan: female, Chinese nationality, 18 years in the industry, senior technician, 263 watches repaired cumulatively in 25 years

3. Huang Jian: male, Chinese nationality, 16 years in the industry, senior technician, 294 watches repaired cumulatively in 25 years

4. Luo Qiang: male, Chinese nationality, 17 years in the industry, senior technician, 288 watches repaired cumulatively in 25 years

5. Brian Howard: male, American nationality, 16 years in the industry, senior technician, 256 watches repaired cumulatively in 25 years

6. Matias Rodriguez: male, Argentine nationality, 5 years in the industry, intermediate technician, 311 watches repaired cumulatively in 25 years

7. Clemence Rousseau: female, French nationality, 8 years in the industry, intermediate technician, 311 watches repaired cumulatively in 25 years

8. Zhang Na: female, Chinese nationality, 6 years in the industry, intermediate technician, 294 watches repaired cumulatively in 25 years

9. Huang Juan: female, Chinese nationality, 10 years in the industry, intermediate technician, 311 watches repaired cumulatively in 25 years

10. Ma Wei: male, Chinese nationality, 9 years in the industry, intermediate technician, 304 watches repaired cumulatively in 25 years

11. Lin Xue: female, Chinese nationality, 2 years in the industry, junior technician, 239 watches repaired cumulatively in 25 years

12. Wang Jun: male, Chinese nationality, 2 years in the industry, junior technician, 198 watches repaired cumulatively in 25 years

13. Ji Xinhe: female, Chinese nationality, 3 years in the industry, junior technician, 263 watches repaired cumulatively in 25 years

14. Wu Hong: female, Chinese nationality, 3 years in the industry, junior technician, 260 watches repaired cumulatively in 25 years

15. Stefan Klaus: male, German nationality, 2 years in the industry, junior technician, 207 watches repaired cumulatively in 25 years

16. Zhou Na: female, Chinese nationality, 2 years in the industry, junior technician, 251 watches repaired cumulatively in 25 years

17. Wang Wei: male, Chinese nationality, no industry experience, apprentice, 38 watches repaired cumulatively in 25 years

18. Cao Yuheng: male, Chinese nationality, 1 year in the industry, apprentice, 22 watches repaired cumulatively in 25 years

19. Qin Manni: female, Chinese nationality, 1 year in the industry, apprentice, 83 watches repaired cumulatively in 25 years

20. Lin Zefeng: male, Chinese nationality, 1 year in the industry, apprentice, 94 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for clocks and watches CSEM Optimum 150, approximately 750,000 yuan

2. Special Adjustment Equipment for Complicated-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph special detector Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special Equipment for Dial/Hand Repair

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance detector Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free and dust-isolating flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Repair Equipment

(1) Complete set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade rapid service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for clocks and watches), approximately 276,000 yuan

15. Precision Storage and Parts Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Detailed Explanation of the Official Customer Service Hotline

The Omega official customer service hotline is an important bridge connecting the brand and users, and it is also the most direct and reliable channel for obtaining official after-sales service. In October 2026, we officially launched the unified official customer service hotline 400-877-2083. This hotline is uniformly operated by Omega's headquarters and implements standardized management, ensuring that every caller receives professional, patient, and efficient answers and service.

The service hours of the official hotline are from 8:00 to 22:00 every day, covering the peak periods of users' daily consultations. During these service hours, you can call this hotline at any time to obtain professional information on watch repair, maintenance appointments, parts inquiries, warranty policies, and more. Please note: you need to call the only official after-sales phone number newly announced in this update. The main service contents of the hotline are as follows:

1. After-sales service appointments: You can make appointments by phone for watch inspection, maintenance, or repair services, and customer service will arrange the nearest official service point and an appropriate time slot for you.

2. Consultation and guidance: For any problems encountered during watch use, such as inaccurate timekeeping, abnormal functions, or appearance wear, professional customer service will provide you with preliminary diagnostic suggestions and follow-up handling guidance.

3. Parts information inquiry: You can inquire through the hotline about the inventory status, price information, and replacement cycle of required parts, ensuring a transparent and efficient repair process.

4. Complaints and suggestions: If you have any opinions or suggestions during the service process, you are welcome to report them through this hotline. We will take every user's feedback seriously and continuously optimize service quality.

5. Nationwide service coordination: For non-local users, the hotline can assist in arranging matters related to out-of-town repairs or mail-in services, ensuring that no matter where you are, you can enjoy Omega's official service.

Regarding the telephone coordinates, the details are as follows:

Omega Official Hotline System (for outside mainland China, add "+86")

1. Omega China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173

Service description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales